Exhibition Manual

Exhibitor's Portal

Login details to access the Portal will be sent to the company representative once the contract is signed.
The Portal enables exhibitors and supporters to:

  • Submit company logo and profile
  • Order lead retrieval (badge scanners)
  • Submit a list of individual names for badges and order extra exhibitor badges
  • Submit booth drawing (applicable for “Space Only” booths)
  • Submit lettering for Fascia sign (applicable for “Shell Scheme” booths)
  • Submit other deliverables as per sponsorship agreement

Notes:

  • One user per company – the login details will be sent to the contact person who signed the contract. This person is responsible for passing on the login details to any third party if needed.
  • The contract holder will be charged with any purchase made by their employee, stand builder or agency, unless requested otherwise in writing.
  • Access to all Portal services will be available only after submission of your company logo and profile.
  • Please note that access to the portal allows the user to see information from previous transactions made by your company with Kenes Group.
  • Only deliverables indicated in your contract, should be submitted via the Portal. Items that are not included in your contract will not be processed.
  • Keep the Exhibitor’s Portal link together with your login information on hand for future reference.

Exhibiton Timetable

Set up 2nd September Exhibition Set-up- for Space Only Stands   08:00 – 22:00  
2nd September Exhibition Set-up- for ALL Stands   12:00-22:00
3rd September Exhibition Set-up- for ALL Stands

DECORATION ONLY

 08:00-13:00

13:00 – 17:30

Exhibition Opening 3rd September 17:30 – end of Networking Reception

 

4th September 10:00 -19:30
5th September 10:30-17:00
6th September 10:00-17:30
Dismantling 6th September 17:30 – 21:00             

Exhibition – Deadlines and Key Dates

Below are estimated deadlines. Updated deadlines will be as published in the Exhibition Technical Manual when available

Action Item Deadline
Company logo and profile As soon as possible, no later than July 5th 2024
Booth design for approval
(For ‘Space Only’ booths)
July 22nd 2024
Text for Fascia
(Shell Scheme booths only)
July 22nd 2024
Dedicated Wi-Fi / Internet* 4 weeks prior to the event
Lead Retrieval Barcode Readers Order* August 1st 2024
Onsite rate will be applied for orders received after the deadline
Extra Exhibitor badges August 20th 2024
Hostesses & Temporary Staff Hire 6 weeks prior to the event
Security* 6 weeks prior to the event
 

4-5 weeks prior to the event

 After the deadline surcharge might be applied. Stock upon availability

Electricity order*
Furniture Rental
Shell Scheme Extras
Graphics/Signage
Daily Booth Cleaning
In-booth Catering*
Plants & Floral decorations
Telecommunications and AV Equipment
(Screens, Laptop, Desktop)
Shipment via advance warehouse Approx. 10 days prior to the event

*Exclusive service to Kenes / the venue /official supplier(s)

Lead Retrieval/Badge Scanners

Lead Retrieval systems are a helpful tool for receiving participants’ contact information when they visit your booth. Information obtained by the lead retrieval system enables Exhibitors to enhance their database by securing valuable leads for further marketing and communication.
We are pleased to offer you the “K-Lead” Application. Exhibitors can download the “K-Lead” app onto their own smart phone or tablet and transform their device into an instant, easy lead retrieval system and capture participants’ full contact information with a quick scan of their badge.

The advantages of the “K-Lead” application:

  • Effortless process using registration badge barcode.
  • Allows to immediately view the leads information.
  • Ability to insert exhibitor’s comments for each lead.
  • Application is available for download from Apple store or Google play: “K-Lead App”.
  • Cost per unit – USD 750 (excluding 4% credit card charges fees, excluding VAT if applicable)

The Application should be installed on your company/personal device (tablet/smart phone). Operational information will be sent in due course.

To order “K-Lead” Application, please access the Exhibitor’s Portal https://exhibitorportal.kenes.com

Deadline2 weeks prior to the event 
Onsite rate of USD 850 will be applied for orders received after above deadline.

Please note:

  • Device is not included. The Application should be installed on your company/personal device (tablet/smart phone).
  • In accordance with the general data protection regulation (GDPR), Kenes Group has updated its privacy policy. You can view our updated privacy notice here.
    Kenes will not share delegate’s personal data with third parties without their consent.
    Please note that similarly to sharing a business card, presenting a delegate badge for scanning at exhibition booths or industry symposia constitutes an expression of consent to share their personal details with the company that is scanning their badge so that it may contact them in the future.
  • Barcodes on delegate’s badges contain contact information as supplied by the delegate or the agency responsible for the registration process of the delegate. We regret that in some cases, such as when group registration is completed by a company, we may not be in possession of the full contact details.
  • In addition, please note that neither Kenes Group nor the Organising Committee is responsible for the content of the information.

Exhibitor Badges

  • Each exhibiting company is entitled to free exhibitor badges. The amount of free exhibitor badges is stated in your contract and determined by your booth size.
    Two exhibitor badges will be given for the first 9 sqm booked, and one additional badge for each 9 sqm thereafter.
  • Exhibitor badges allow free access to the exhibition area, refreshments served as indicated in the programme timetable and access to the Welcome Reception.
  • Exhibitors with an Exhibitor Badge are not eligible to receive CME/CPD credits and will not appear in the World Map feature (List of participants).
  • Exhibitor badges are generic and state the name of the company only, in order that they may be used interchangeably between staff members.
  • Exhibitor badges can be collected at the registration desk on-site during registration opening hours (they will not be mailed in advance).
  • Exhibitors are required to access the Exhibitor’s Portal and provide the name of the company they wish to be displayed on the badges (otherwise the company name as appear on your application form will be printed on the badge).
  • Extra exhibitor badges may be purchased online through the Exhibitor’s Portal, at additional cost. Companies may purchase a maximum number of exhibitor badges as follows:
    • Booths of up to 60sqm – 15 exhibitor badges
    • Booths larger than 60sqm – 25 exhibitor badges

Notes:

  • Price for extra exhibitor badge is USD 795
  • Deadline for ordering additional exhibitor badges via the exhibitor portal: 20th August 2024
  • Please make sure that your company profile has been submitted via the Exhibitor’s Portal before placing an order.

All company representatives are required to wear exhibitor badges to access the exhibition. Company representatives not wearing their badges will not be allowed to access the exhibition. Exhibitor badges are for the use of company personnel manning the booth and should not be used to bring visitors to the exhibition.

Stand builders and staff must wear service passes during the entire set-up and dismantling period. Service Passes are free of charge and may be collected from the Exhibition Manager Desk on-site.

Space Only Booths

Exhibitors using independent contractors are required to submit the following for approval 6 weeks prior to the event.

  • A scaled drawing (scaled 1:200 DWG), including elevation views of the proposed booth to be built.
  • Electrical connections – a list of all appliances.
  • Other utility connections such as water and drainage are subject to availability and must be checked with the Exhibition Manager prior to submitting the designs.
  • The name and contact details of their construction company.

Please submit the files through the Kenes Exhibitor’s Portal: https://exhibitorportal.kenes.com.

Design Guidelines:

  • All exhibits are to be displayed to avoid blocking aisles, obstructing adjoining booths, or damaging the premises.
    Exhibition material that is placed outside the booth will be removed at the exhibitor’s expense.
  • Exhibitors are kindly requested to allow sufficient see-through areas that ensure clear views of surrounding exhibits. Entire sideway walls will not be approved.
  • Island booths should be partly accessible on all “open” sides. We try to keep the exhibition as open and inviting as possible. Wall construction alongside aisle is allowed but max 1/3 of side to side may be covered. Construction finish must be perfect in all the stand’s visible areas, including rear sides.
  • Construction finish must be perfect in all the booth’s visible areas, including rear sides.
  • Raised floor/platform: please note that if your booth has a platform/raised floor, you are required to provide a ramp or sloped edging around the entire booth to ensure access for people with disabilities. The platform sides must be closed and finished neatly. The platform edges must be safe, secured and easily visible to avoid trip hazard.
  • All structural back walls of adjacent booths must be properly decorated. Back Walls (reverse side) over 2.5m in height must be finished in white or grey (no wiring, no graphics, no logo).
  • Advertising on the boundary with other booths is prohibited.
  • A back wall of a booth (including shell scheme booths) cannot be used by other exhibitors.
  • Multilevel structures are not permitted.
  • Arches, bridges or similar construction connecting two or more booths are not permitted.
  • The maximum building height is 3.5 meters
  • Ceiling rigging is not allowed.
  • Special care must be taken to ensure that the visitors will be inside the booth and not standing in the aisle. For example:
    • Screens or any kind of equipment to be shown or demonstrated may not be placed directly on the edge of the stand contracted in order to ensure that the visitor viewing the screens/equipment will be inside the booth and not blocking aisle traffic.
    • Any counter, desk etc. or device (i-pads, touch screens etc.) which attract visitors may not be placed immediately at the borders of the booth facing the aisles (there should be a reasonable distance from the edge of the booth)
    • Coffee bars or other F&B-stations must be inside the booth area to ensure that the visitors are standing and queuing up inside the booth area and not standing in the aisle

Pipes & Drapes Booths

  • All basic pipes & drapes booths will be designed and built by the official stand contractor.
  • Exhibitors are not allowed to make any alterations to the structure of the booths or remove any integral parts from the booths. Exhibitors wishing to remove or change the location of any standard equipment within the shell scheme booth should indicate clearly on the location plan and forward it together with clear instructions to the official stand contractor and the Exhibition Manager 4 weeks prior to the event.   
  • No free-standing stand-fitting or display(s) may exceed the height of the pipes & drapes structure or extend beyond the boundaries of your booth. This includes company names, advertising materials, flags and logos provided by the exhibitor.
  • It is not allowed under any circumstances to cut, nail or drill into or through the walls, facia, floor or ceiling.
  • Please do not use any adhesive products that may leave marks or cause damage to the panels and booth structure. Booth must be returned in the same condition in which it was received. Any damage to booth structure will be invoiced to the exhibitor.
  • No painting is allowed; no usage of nails or screws.
  • Double sided tape can be used to affix lightweight items as long as it does not leave mark or cause damage to the panels and booth structure. Velcro can be used as well (male & female).
  • It is possible to use fishing line (nylon) to hang pictures etc.
  • An exhibitor occupying a booth at the corner can request to close the additional side(s). If the official stand contractor and the Exhibition Manager is not being notified in writing 4 weeks prior to the event, it will be assumed that the exhibitor will have opening on the additional side(s).
  • A back wall of a booth (any booth type) cannot be used by other exhibitors.
  • Excess stock, literature or packing cases may not be stored on, around or behind booths, unless contained within a lockable storeroom.

Maximum of 21 characters (including spaces) may be written on your fascia (applicable for a 9 sqm booths).
Please submit lettering for fascia via the Exhibitor’s Portal no later than 4 weeks prior to the event.
If you wish to print your company logo on the board, instead of your company name or in addition to the name, this can be ordered at additional cost via the official stand contractor.
If text for your fascia is not received by the official deadline, we will provide you with a fascia title as per your application form.

Booth Services

The organiser will arrange for general cleaning of the exhibition premises prior to the opening of exhibition and daily prior to opening thereafter (excluding exhibit booths and displays).
Daily booth cleaning can be ordered directly with the official supplier.

Complimentary Wi-Fi will be provided by the meeting during official meeting days at most areas.
This public Wi-Fi connection is limited for basic web browsing or checking emails.
Should you have any internet-based feature/device/activity at your booth (for example: product demonstrations), we strongly recommend ordering a dedicated internet connection for your booth (wireless or wired connection) to guarantee a consistent internet connection inclusive of technical support.
Wired internet and Wi-Fi connection may be ordered via here:

Click here to enter the online shop

eventnowsupport@encoreglobalmail.com or SwissChiSales@encoreglobal.com

Important:

  • Please be advised private Wi-Fi networks installations in the booth are not allowed.
  • The venue and the organiser reserve the rights to discontinue any activity which interfere with the hall Wi-Fi coverage. 
  • Technical support: we will ensure that the service you purchased is functioning as it should, however we cannot troubleshoot or repair issues with client-provided equipment.
  • The exhibitor is responsible for following legal, ethical, moral and generally accepted internet and e‐mail conduct when communicating across the meeting’s network. The venue reserves the right to disconnect and/or limit a user’s right to or use of the network if rules and conditions are not respected.

Electricity and Electrical Installations

According to the regulations, the electrical installations for the Exhibition will only be connected to the power supply after being checked and approved by Encore.
Encore is the only company allowed to connect any kind of device directly to the main power sources.
Only Encore is authorized to provide the electrical switchboard for the power points. Thus, every exhibitor should order an electrical switchboard from Encore and to pay for the electrical consumption according to his power needs.
Please refer to the online shop of Encore – click here 

If you have any questions you can reach out to them: eventnowsupport@encoreglobalmail.com or SwissChiSales@encoreglobal.com

  • The Encore will check that the official electrical switchboard is not removed from the booth.
  • Electrical switchboards provide by the venue cannot be manipulated, adjusted, or damaged. The cost of a damaged Electrical box will be charge to the company who has ordered it.
  • Encore staff are authorized to unplug the whole booth electrical installation if they detected that it is not properly done, with a possible danger.

 

Please note the following:

  • Electrical switchboard and/or various power outputs will be ALWAYS delivered on the booth floor. Exhibitor/Stand Builder must check how to place it inside the booth to be hidden and accessible.
  • Electricity supply from the neighboring stand is not allowed!
  • It is the exhibitor/stand builder/electrician responsibility to advise how to connect your box provided by Encore
  • Encore only could provide electricity from the electrical ducts on the floor.
  • It is compulsory the use of plastic protector to hide electrical cables (at the exhibitors’ expense).
  • Electrical extensions ordered will be supplied next to the electrical box and the exhibitor/ stand builder will have to place on the space they need them

 

Encore provides electric service in the Exhibition area during the official exhibition times only. At the end of the day, we recommend switching off your main electrical sources in order to save energy and not to occur any accidents overnight.

 

At the end of the day the booth manager must check before leaving the venue that the booth spotlights are switched off for security and ecologic reasons. The venue won’t be liable for any damages caused from this action.
In case that the stand builder brings their own electrical switchboard, (it has to be connected to the venues switchboard) it is mandatory to indicate which power line goes to the booth lights, in order that the booth manager knows which switch/button has to be turned off at the end of the day.
In case that you need 24h electrical connection for some devices (excluding booth general light), a second electrical switchboard will have to be ordered. The booth manager will have to make sure the general lights are turned off.

  • Please do not leave any bags, boxes, suitcases or any type of product unattended at any time, whether inside or outside the exhibition area.
  • Neither the venue nor the organiser can accept responsibility for the security of the booths and their contents. The venue as well as the organiser are not liable for any possible loss, theft and/or damage occurred during the rental period of any private property or goods. Exhibitors are fully responsible for the security of their booth and equipment.
  • If you wish to hire security for your booth, this can be done via the venue.

The venue exclusively offers food, beverage and catering services.

Absolutely no food or beverage from outside the venue is allowed into the premises without prior written approval from the venue. This includes bottled water.
Exhibitors who wish to order food and beverages for their booth are welcome to do so directly with the venue.

The exhibitor should consider the space available on the booth to store and display the requested deliveries.

For ordering waste removal please contact the venue directly.

Short-term storage of materials left over after assembly (empty boxes, crates, cases, palettes etc.) should be coordinated with the official logistic agent (payable service).
Under no circumstances may packing materials of any kind be left in the aisles, on the booths, around or behind the booths.
Please contact the official logistic agent with information on sizes and number of parcels, size and storage period.
Shipments sent directly to the venue prior to the set-up period, will be refused by the venue.
Once the event & dismantling are over, the venue shall not be held responsible for the safekeeping and/or storage of any items left in the building. If the venue takes care of the removal of these items, it will be charged to the exhibitor.

Shipping Instructions

Freeman:

For big packages / pallets, please contact Freeman to manage your shipping .

Click here

All freight for exhibits should be shipped directly to Freeman warehouse.

UPS:

For small packages please contact UPS: Please click here for UPS shipping instructions!

The delivery and removal of materials and goods for the exhibition booths is allowed only by the official freight forwarder.

Please be advised that neither the organiser nor the venue can accept deliveries on an exhibitor’s behalf and arrangements must be made for a stand/company representative to be available when deliveries are made.

Deliveries may not be made prior to the first set-up day. Any deliveries prior to this date, or off the official working hours, will not be accepted. Please refer to the Shipping Instructions for the deliveries address.

As a courtesy to the delegates and your fellow exhibitors, deliveries or the removal of any equipment to/from booth must be made 30 minutes before or after exhibition opening hours.

Rules and Regulations

Animals
It is not permitted to bring animals into the venue.

Build-Up & Dismantling Period

  • During the period of build-up and dismantling, it is prohibited to consume alcoholic beverages in the working area as well as to perform work under the influence of alcohol and drugs.
  • The Exhibitors and contractors are required to wear the necessary personal protective equipment such as safety footwear, protective helmets, eye protection, and hand protection required by the specific work activity.
  • The use of cutting machines, welding machines, sanders and spray guns is strictly forbidden.

Children

No person under the age of 18 years can be admitted to the Exhibition, either during build‐up, opening days or breakdown. This rule also applies to Exhibitors’ children and must be strictly enforced to comply with the safety regulations of the exhibition.

Compressed Gases

Use of compressed gases is not allowed.

Damage to the Building

Exhibitors are liable for all damage caused to floors, walls, and pillars during the installation, Exhibition, and dismantling periods. No adhesive stickers and fixtures of any kind are allowed on floors, walls, and pillars.

Disposal of Material

It is obligatory to collect and dispose of all material during the build-up or dismantling of the event.

When the dismantling period is over, the exhibitor loses any right to claim losses or damage to property left behind. Any costs incurred by the venue in removing this property will be charged to the exhibitor.

Fire Regulations

  • Stand material and fittings must be non-flammable or impregnated treated with fire-retardant chemicals.
  • As a general rule, easily inflammable synthetic substances, foam polyester, and non-fireproof straw and reeds are prohibited.
  • Exhibitors are prohibited from covering displays with drop cloths, sheets, table cloths or other non-flame resistant material.

Fire Insurance (compulsory)

Exhibitors must be insured against fire.

Health & Safety

  • It is the responsibility of the stand holder to ensure the health, safety and welfare of all employees, contractors and visitors as far as is reasonably practicable throughout the event.
  • It is recommended that the stand holders appoint a supervisor for the stand, with the specific responsibility for ensuring the health & safety of their staff and stand builders. It is advisable that a Risk Assessment is completed for the stand and submitted to the organisers.

Hanging of Posters, Banners etc.             

Hanging of posters, banners or decals, stickers or similar items, on the walls, floors, ceilings, or pillars within or outside the installations of the venue are not allowed without a prior written authorisation.

Insurance (compulsory)

  • Exhibitors are required to take out appropriate Insurance. Third part liability insurance is obligatory. It remains the Exhibitors full responsibility to insure themselves appropriately.
  • Neither the organisers nor the venue, their representatives or agents will be held responsible for any loss or damage to exhibitor’s property. Exhibitors must take precautions to protect their property against pilferage.
  • The organisers do not provide insurance for exhibitors and their property. The exhibitor is responsible for his property and person and for the property and persons of his employees through full and comprehensive insurance and shall hold harmless the organisers for any and all damage claims arising from theft and those perils usually covered by a fire and extended-coverage policy. Therefore, you are obliged to have a public liability insurance that covers all injuries to persons and damages that might cover in connection with the exhibition.
  • Exhibitors are personally liable for all expenses incurred by the organisers or by third parties in regard to technical services provide.
  • We also recommend that you have additional coverage against loss or damage to exhibition material during transport and during exhibition times. Please make arrangements for insurance coverage through your company’s insurer.

Liability

  • Exhibitors are responsible for all property damage as well as any loss or injury caused by their property, agents or employees. Companies will indemnify the organisers against all claims and expenses arising from any damages.
  • If for any reason whatsoever the Exhibition needs to be abandoned, postponed, or altered in any way, either in whole or part, or if the organisers find it necessary to change the dates of the Exhibition, the organisers shall not be liable for any expenditures, damages or loss incurred in connection with the Exhibition.
  • The organisers shall further not be liable for any loss which the Exhibition or Exhibition contractors may incur due to the intervention of any authority which prevents or restricts the use of the venue or any part thereof in any manner whatsoever.

Security

  • Safety and Security of Material. Please do not leave any bags, boxes or suitcases unattended at any time, whether inside or outside the exhibition area. The organisers and venue cannot accept liability for loss of or damage to private property or goods.
  • The organisers will provide security guard service in the exhibition hall during off-show hours. Neither The venue nor the organisers can accept responsibility for the security of the stands and their contents and for damage to, or theft of any goods. Exhibitors are fully responsible for the security of their stand and equipment.

Sound Equipment and Music

  • In general, the use of sound equipment/music in booths is permitted as long as the noise level does not disrupt the activities of neighbouring exhibitors.
  • Speakers and other sound devices should be positioned to direct sound inward (to be contained within the booth) rather than outward (toward aisles and other exhibitor booths).
  • It is difficult to establish decibel level restrictions. If an exhibitor or attendee is standing within ~3 meters of an exhibitor’s booth and cannot carry on a normal voice-level conversation, the noise source is too loud.
  • Live music is not allowed.
  • The organisers reserve the right to require the exhibitor to discontinue any activity, noise, or music that is too loud
  • The organisers reserve the right to require the exhibitor to discontinue any activity, noise, or music that is deemed objectionable.
  • Exhibitors are reminded that third party copyrights should not be infringed. The organisers have no copyright responsibility in respect of any exhibiting company.
  • Proper dispensation must be obtained and any royalties due, paid prior to the use of materials. Should any copyright dispute arise, the organisers will not be liable for any resulting loss or damages, sustained by any exhibitor or third party.

Promotional Activities

  • All demonstrations or instructional activities must be confined to the limits of the Exhibition booth.
  • Advertising material and signs may not be distributed or displayed outside the exhibitor’s booth.
  • Advertising activities must not cause obstructions or disturbances in the aisles or at neighboring booths.
  • The Exhibition Manager reserves the right to require the exhibitor to discontinue any activity, noise, or music that is deemed objectionable.
  • Filming:
    – Exhibitors may film within their own booth, capturing their own staff and materials. However, all equipment and camera crew must remain within the designated booth boundaries.
    – Filming of other exhibitors, their materials, Congress features, or any sessions is strictly prohibited without prior written permission from the organizer or the respective exhibitor.
  • Photography:
    – Photography within booths is not permitted during exhibition setup/breakdown unless the photographer is officially hired by the exhibitor and ensures no neighboring booths are included in the pictures.
    -During exhibition opening hours, photography of all aspects of the event is generally allowed, except where the photographer or equipment would obstruct or endanger delegates or staff.

Smoking Policy

The venue operates a NO SMOKING policy in ALL halls.

Special Effects

Special effects lighting, live music, smoke and laser projection may not be used in the stands.

No permission will be given for projection in the aisles or on the walls of the hall.

Waste Removal

  • Exhibitors are responsible for the removal of all refuse/waste from the exhibition area.
  • Any discarded waste, including promotional material, left behind will be removed by the organisers at the expense of the exhibitor concerned.

We respectfully request that all supporters (sponsors, exhibitors, special interest groups, and other stakeholders) comply with the conference blackout policy and refrain from holding organized meetings or events in parallel to the scientific program.

Participation by exhibitors is dependent upon compliance with all rules, regulations and conditions stated herein.